RadioLink Electronic Limited
www.radiolink.com
other prompt tones are work normal.
All: all the prompt tones are working.
Normal volume: This function can set the volume of all the prompt tone such as "operation",
"warning", “tap button”, "telemetry" etc. The volume is defaults 30%, the minimum volume is
0% which indicate the sound function off, and the maximum volume is 100%.
Warning volume: The warning sound means the audible alarm sound of when switch, dial,
home button, and trim are operated. The volume of warning sound is default 100%, it can be
adjusted.
Voice volume: This function can set the volume of voice broadcast. The volume is default
100%, and the minimum volume is 20%.
Duration: Refers to the duration of a single prompt tone. L*1 indicate the shortest duration
and L*4 indicate the longest duration
Frequency+: Refers to the softness of the prompt tone. The minimum frequency is default
F+0Hz and the maximum is F+200. The lower the value, the softer the sound, and the higher the
value, the sharper the sound.
Press button to broadcast:
To Next Page
Loading...
