Remote control commands
R&S
®
NRPxxS(N)
128User Manual 1177.5079.02 ─ 15
SYSTem:TRANsaction:END............................................................................................135
SYSTem[:SENSor]:NAME...............................................................................................135
SYSTem:VERSion?........................................................................................................136
SYSTem:DFPRint<Channel>?
Reads the footprint file of the power sensor.
Suffix:
<Channel>
.
1...4
Measurement channel if more than one channel is available.
Usage: Query only
SYSTem:ERRor:ALL?
Queries all unread entries in the SCPI communication error queue and removes them
from the queue.
Returns a comma-separated list of error numbers and a short error description in the
first-in first-out order.
Example:
SYST:ERR:ALL?
Query
0,"No error"
Response
Usage: Query only
SYSTem:ERRor:CODE:ALL?
Queries all unread entries in the SCPI communication error queue and removes them
from the queue.
Returns a comma-separated list of error numbers, but no error description.
Example:
SYST:ERR:CODE:ALL?
Query
0
Response: No errors have occurred since the error queue was
last read out.
Usage: Query only
SYSTem:ERRor:CODE[:NEXT]?
Queries the SCPI communication error queue for the oldest entry and removes it from
the queue.
Returns the error number, but no error description.
Configuring the system
To Next Page
Loading...
Need help?
General
