To Next Page

To Previous Page

Operating concepts

R&S

NRPxxS(N)

34User Manual 1177.5079.02 ─ 15

NRP Version Display

Displays version information of all installed, power measurement-relevant software

packages.

R&S NRP‑Z Uncertainty Calculator

Determines the expanded measurement uncertainty. The tool comes with a manual

(PDF) that is also available in the "Start" menu.

S-Parameter Update Multi

Helps loading an S-parameter table into the power sensor.

See Chapter 9.8.4.6, "Using the S-Parameters program", on page 113.

Terminal

Low-level communication program for sending commands to the power sensor.

5.2 Browser-based user interface

Requires a power sensor with networking capabilities, a LAN power sensor.

With the integrated, browser-based graphical user interface of the LAN power sensor,

you can easily configure the most common settings and measure in the provided mea-

surement modes.

There is no installation required. The web user interface can be used with all devices

and operating systems, including tablets and smart phones that are connected to the

same network.

Required equipment

●

R&S NRPxxSN LAN power sensor

●

LAN cables

●

PoE Ethernet switch or a non-PoE Ethernet switch and a PoE injector

●

Device with a supported web browser installed:

– Mozilla Firefox 33 or later

– Google Chrome 36 or later

– Microsoft Internet Explorer 10 or later

– Safari 5.1 or later

Browser-based user interface

R&S NRP Series User Manual

Other manuals for R&S NRP Series