Remote control commands
R&S
®
NRPxxS(N)
130User Manual 1177.5079.02 ─ 15
0x0a as appended delimiter for line feed
Usage: Setting only
Manual operation: See "Firmware Update" on page 56
SYSTem:FWUPdate:STATus?
Reads the result of the firmware update performed using SYSTem:FWUPdate
on page 129.
While a firmware update is in progress, the LED of the power sensor flashes in bright
white color. When the firmware update is completed, you can read the result.
The result of the query is a readable string.
Example:
SYST:FWUP:STAT?
Query
"Success"
Response
Usage: Query only
Manual operation: See "Firmware Update" on page 56
SYSTem:HELP:HEADers? [<Item>]
Returns a list of all SCPI commands supported by the power sensor.
Query parameters:
<Item> <block_data>
Usage: Query only
SYSTem:HELP:SYNTax? [<Item>]
Queries the relevant parameter information for the specified SCPI command.
Query parameters:
<Item>
Example:
SYST:HELP:SYNT? 'sens:aver:coun'
Usage: Query only
SYSTem:HELP:SYNTax:ALL?
Queries the implemented SCPI commands and their parameters. Returns the result as
a block data.
Usage:
Query only
Configuring the system
To Next Page
Loading...
Need help?
General
