R&S NRP Series User Manual

Remote control commands
R&S
®
NRPxxS(N)
140User Manual 1177.5079.02 ─ 15
● Controlling the ENABle part.................................................................................. 141
● Controlling the negative transition part..................................................................141
● Controlling the positive transition part...................................................................142
9.13.1 General status register commands
STATus:PRESet.............................................................................................................140
STATus:QUEue[:NEXT]?................................................................................................ 140
STATus:PRESet
Resets the edge detectors and ENABle parts of all registers to a defined value.
Usage:
Event
STATus:QUEue[:NEXT]?
Queries the most recent error queue entry and deletes it.
Positive error numbers indicate sensor specific errors. Negative error numbers are
error messages defined by SCPI.
If the error queue is empty, the error number 0, "No error", is returned.
Usage:
Query only
9.13.2 Reading the CONDition part
STATus:DEVice:CONDition?
STATus:OPERation:CALibrating:CONDition?
STATus:OPERation:CONDition?
STATus:OPERation:LLFail:CONDition?
STATus:OPERation:MEASuring:CONDition?
STATus:OPERation:SENSe:CONDition?
STATus:OPERation:TRIGger:CONDition?
STATus:OPERation:ULFail:CONDition?
STATus:QUEStionable:CALibration:CONDition?
STATus:QUEStionable:CONDition?
STATus:QUEStionable:POWer:CONDition?
STATus:QUEStionable:WINDow:CONDition?
Usage:
Query only
9.13.3 Reading the EVENt part
STATus:DEVice[:EVENt]?
STATus:OPERation:CALibrating[:SUMMary][:EVENt]?
STATus:OPERation[:EVENt]?
Using the status register

R&S NRP Series Specifications

General

Product Type	Power Sensor
Connector Type	SMA, 3.5 mm, 2.4 mm
Interface	USB, LAN
Storage Temperature	-40°C to +70 °C
Dimensions	Dependent on model
Weight	Dependent on model
Compatibility	R&S Instruments
Type	Diode