This manual describes the following three-path diode power sensors with firmware version FW 02.30 and
later:
●
R&S
®
NRP8S (1419.0006K02)
●
R&S
®
NRP8SN (1419.0012K02)
●
R&S
®
NRP18S (1419.0029K02)
●
R&S
®
NRP18SN (1419.0035K02)
●
R&S
®
NRP33S (1419.0064K02)
●
R&S
®
NRP33SN (1419.0070K02)
●
R&S
®
NRP40S (1419.0041K02)
●
R&S
®
NRP40SN (1419.0058K02)
●
R&S
®
NRP50S (1419.0087K02)
●
R&S
®
NRP50SN (1419.0093K02)
●
R&S
®
NRP67S (1424.6396K02)
●
R&S
®
NRP67SN (1424.6409K02)
It also describes the following TVAC-compliant three-path diode power sensor:
●
R&S
®
NRP33SN-V (1419.0129K02)
●
R&S
®
NRP67SN-V (1424.6415K02)
© 2022 Rohde & Schwarz GmbH & Co. KG
Muehldorfstr. 15, 81671 Muenchen, Germany
Phone: +49 89 41 29 - 0
Email: info@rohde-schwarz.com
Internet: www.rohde-schwarz.com
Subject to change – data without tolerance limits is not binding.
R&S
®
is a registered trademark of Rohde & Schwarz GmbH & Co. KG.
Trade names are trademarks of the owners.
1177.5079.02 | Version 15 | R&S
®
NRPxxS(N)
Throughout this manual, products from Rohde & Schwarz are indicated without the
®
symbol, for example R&S
®
NRP18SN is abbre-
viated as R&S NRP18SN.
To Next Page
Loading...
