Parameter configuration of master
For master related parameter configuration, refer to descriptions for master.
The address configured for slave in the master should be consistent with the pa-
rameter address configured for the slave. Communication baud rate and PPO
type are determined by the master.
GSD file
Users may log on the website of the company at www.boschrexroth.com/
EFC3600 to download or contact sales personnel to obtain the GSD file
BREFC01.zip. For installation and PROFIBUS system configuration method,
please refer to respective instructions of system configuration software.
Bosch Rexroth AG
Communication Protocols
EFC 3600
210/259
DOK-RCON03-EFC-3600***-IT03-EN-P
To Next Page
Loading...
