9.4 Electromagnetic Compatibility (EMC)
9.4.1 EMC Requirements
General information
The electromagnetic compatibility (EMC) or electromagnetic interfer‐
ence (EMI) includes the following requirements:
● Sufficient noise immunity of an electric installation or an electric device
against external electric, magnetic or electromagnetic interference via
lines or through air.
● Sufficiently low noise emission of electric, magnetic or electromagnetic
noise of an electric installation or an electric device to other surrounding
devices via lines or through air.
Noise immunity in the drive system
Basic structure for noise immunity
The figure below illustrates the interference for definition of noise immunity
requirements in the drive system.
Fig. 9-4: Noise immunity in the drive system
DOK-RCON02-FV*********-IB08-EN-P Bosch Rexroth AG 175/259
Rexroth Frequency Converter Fv
Technical Data