2. It is recommended to use 4-core cables to connect the motor. Ca‐
bles are connected to motor terminals PE-U-V-W.
3. If shielded cables are used, the shielding layer should be securely
connected to the metal surface of control cabinet.
It is recommended to use shielded cables in accordance with
specified EMC classification.
Main circuit wiring diagram
Fig. 5-6: Main circuit wiring diagram
DOK-RCON02-FV*********-IB08-EN-P Bosch Rexroth AG 45/259
Rexroth Frequency Converter Fv
Installation
To Next Page
Loading...
Need help?
General
