● The instructions for installation in accordance with EMC requirements
can be found in the section on EMC in the respective application docu‐
mentation.
The machine or installation manufacturer is responsible for compliance
with the limit values as prescribed in the national regulations.
● The technical data, connection and installation conditions of the compo‐
nents are specified in the respective application documentations and
must be followed at all times.
National regulations which the user must take into account
● European countries: In accordance with European EN standards
● United States of America (USA):
– National Electrical Code (NEC)
– National Electrical Manufacturers Association (NEMA), as well as
local engineering regulations
– Regulations of the National Fire Protection Association (NFPA)
● Canada: Canadian Standards Association (CSA)
● Other countries:
– International Organization for Standardization (ISO)
– International Electrotechnical Commission (IEC)
2.3.3 Hazards by Improper Use
● High electrical voltage and high working current! Danger to life or seri‐
ous injury by electric shock!
● High electrical voltage by incorrect connection! Danger to life or injury by
electric shock!
● Dangerous movements! Danger to life, serious injury or property dam‐
age by unintended motor movements!
● Health hazard for persons with heart pacemakers, metal implants and
hearing aids in proximity to electric drive systems!
● Risk of burns by hot housing surfaces!
● Risk of injury by improper handling! Injury by crushing, shearing, cutting,
hitting!
● Risk of injury by improper handling of pressurized lines!
2.4 Instructions with Regard to Specific Dangers
2.4.1 Protection against Contact with Electrical Parts and Housings
This section concerns components of the electric drive and con‐
trol system with voltages of higher than 50 V.
Contact with parts conducting voltages above 50 V can cause personal dan‐
ger and electric shock. When operating components of the electric drive and
control system, it is unavoidable that some parts of these components con‐
duct dangerous voltage.
High electrical voltage! Danger to life, risk of injury by electric shock or seri‐
ous injury!
Bosch Rexroth AG DOK-RCON02-FV*********-IB08-EN-P28/259
Rexroth Frequency Converter Fv
Safety Instructions for Electric Drives and Controls
To Next Page
Loading...
Need help?
General
