Ricoh Pro C5200s - Page 45

Affected area Solution
The top and
bottom are fainter
or denser.
cez554
1. In the [Machine: Image
Quality] group on the
[Adjustment Settings for
Skilled Operators] menu,
select [Adjust Image
Density/ DEMS] and
execute [Image Density
Adjustment: Manual
Execute].
2. If the problem persists,
contact your service
representative.
(B) The density is uneven in a part of the image.
Affected area Solution
The leading edge
is fainter.
cez555
1. In the [Machine: Image
Quality] group on the
[Adjustment Settings for
Skilled Operators] menu,
select [Adjust Image
Density/ DEMS] and
execute [Image Density
Adjustment: Manual
Execute].
2. If the problem persists, see
page 46 "Fainter
Leading Edge".
Density Problems
43