Rockwell Automation PowerFlex 700 - Page 152

Index-4
PowerFlex® 700L Liquid-Cooled Drive User Manual
Publication 20L-UM001D-EN-P
P
Parameters
700 Vector Control
Accel Mask, 5-3
Accel Owner, 5-4
Alarm 1 @ Fault, 5-2
Alarm Config 1, 5-2
Decel Mask, 5-3
Decel Owner, 5-4
Direction Mask, 5-3
Direction Owner, 5-4
DPI Port Sel, 5-3
Drive Alarm 1, 5-1
Fault Clr Mask, 5-3
Fault Clr Owner, 5-4
Jog Mask, 5-3
Jog Owner, 5-3
Local Mask, 5-3
Local Owner, 5-4
Logic Mask, 5-3
Logic Mask Act, 5-4
MOP Mask, 5-3
MOP Owner, 5-4
Port Mask Act, 5-4
Reference Mask, 5-3
Reference Owner, 5-4
Start Mask, 5-3
Start Owner, 5-3
Stop Owner, 5-3
Write Mask Act, 5-4
Write Mask Cfg, 5-4
700S Phase II Control
700L AlarmStatus, 5-7
700L EventStatus, 5-5
700L FaultStatus, 5-6
PwrStrct Mode, 5-7
Port Mask Act parameter (700 Vector Control),
5-4
power
cables/wiring - general information, 1-4
conditioning - input, 1-2
terminal block wire sizes
Frame 2, 2-15
Frames 3A and 3B, 3-25
watts loss rating, A-6
wiring - installing
Frame 2, 2-12
Frames 3A and 3B, 3-25
power module (Frames 3A and 3B)
lifting instructions, 3-11
removing covers, 3-12
PowerFlex 700 Active Converter (regenerative
drive only)
removing control cassette
Frame 2, 2-7
Frame 3A, 3-13
Frame 3B, 3-13
PowerFlex 700 Vector Control (standard)
information reference, P-1
removing control cassette
Frame 2, 2-8
Frames 3A and 3B, 3-14
PowerFlex 700L
service information reference, P-2
PowerFlex 700L Active Converter (regenerative
drive only)
information reference, P-1
PowerFlex 700S Phase II Control (optional)
information reference, P-1
removing control cassette
Frame 2, 2-8
Frames 3A and 3B, 3-15
PowerFlex 7-Class network communication
adapter information reference, P-2
precautions - general, P-4
PwrStrct Mode parameter (700S Phase II
Control), 5-7
R
Reference Mask parameter (700 Vector Control),
5-3
reference materials for drive, P-2
Reference Owner parameter (700 Vector
Control), 5-4
reflected wave, 1-5
removing Frame 2 drive cover, 2-7
removing power module covers (Frames 3A and
3B), 3-12
repeated start/stop, 1-9
replacing drive door filter on input filter cabinet
(Frames 3A and 3B), 6-7
S
Security Parameter Group (700 Vector Control),
5-4
shielded cables - power, 1-5