Satec PM130 PLUS Series - Page 158

Appendix C Setpoint Triggers and Actions
PM130 PLUS Powermeter Series_Installation Operation and Manual 158
Display Code
Designation
Description
Hi.Pd.P
HI kW IMP PRD
High predicted kW import demand
Hi.Pd.q
HI kvar IMP PRD
High predicted kvar import demand
Hi.Pd. S
HI kVA PRD
High predicted kVA demand
Time and Date Parameters
U.day
DAY OF WEEK
Day of week
YEAr
YEAR
Year
Mon
MONTH
Month
M.day
DAY OF MONTH
Day of month
hour
HOURS
Hours
Min
MINUTES
Minutes
SEC
SECONDS
Seconds
Intr
MINUTE INTERVAL
Minute interval: 1-5, 10, 15, 20, 30, 60 min
1
In 4LN3, 3LN3 and 3BLN3 wiring modes, the voltages will be line-to-neutral; for any other wiring mode,
they will be line-to-line voltages.
Table 36: Setpoint Actions
Display Code
Designation
Description
none
NONE
None (no action)
r1 On
OPERATE RELAY #1
Operate relay RO1
r2 On
OPERATE RELAY #2
Operate relay RO2
r1 OFF
RELEASE RELAY #1
Release latched relay RO1
r2 OFF
RELEASE RELAY #2
Release latched relay RO2
In.Cn.1
INC CNT #1
Increment counter #1
In.Cn.2
INC CNT #2
Increment counter #2
In.Cn.3
INC CNT #3
Increment counter #3
In.Cn.4
INC CNT #4
Increment counter #4
ti.Cn.1
TIME CNT #1
Count operation time using counter #1
ti.Cn.2
TIME CNT #2
Count operation time using counter #2
ti.Cn.3
TIME CNT #3
Count operation time using counter #3
ti.Cn.4
TIME CNT #4
Count operation time using counter #4
notiF
NOTIFICATION
Send a notification message
dLoG1
DATA LOG #1
Record data to Data Log #1