Satec PM130 PLUS Series - Downloading Setups to the Meter; Uploading Setups from the Meter

Chapter 4 Using PAS Software Setting Up the Meter
PM130 PLUS Powermeter Series_Installation Operation and Manual 73
4.4.2 Downloading Setups to the Meter
You can update each setup in your meter one at a time or download all setups together from the site
database.
Individual Download
To update a particular setup in your meter:
1. Check the On-line button on the PAS toolbar
2. Select a meter site from the list box on the toolbar.
3. Select the desired setup group from the Meter Setup menu. Click on the setup tab you want to
download to the meter. As the setup dialog box opens, PAS retrieves and displays the present
meter setup data.
4. If you wish to download a setup saved in the site database, click Open, and then click OK, or fill
in the boxes with the desired configuration data for your device.
5. Click Send.
Batch Download
To download all setups to your device at once:
1. Check the On-line button on the PAS toolbar
2. Select the device site from the list box on the toolbar.
3. Select Download Setups from the Meter Setup menu.
4.4.3 Uploading Setups from the Meter
Individual Upload
To get a particular setup from your device:
1. Check the On-line button on the PAS toolbar.
2. Select a meter site from the list box on the toolbar, and then select the desired setup group from
the Meter Setup menu.
3. Click on the tab of the setup you want to read from the meter. As the dialog box opens, PAS
retrieves and displays the present setup data from the meter. Click Receive if you wish to retrieve
the meter setup once again.
4. To store the setup to the meter site database, click Save As, and then click OK.
Batch Upload
To upload all setups from the device to the site database at once:
1. Check the On-line button on the toolbar.
2. Select the device site from the list box on the toolbar.
3. Select Upload Setups from the Meter Setup menu.