Appendix D Parameters for Data Monitoring and Logging
PM130 PLUS Powermeter Series_Installation Operation and Manual 168
Billing TOU Maximum Demand Register #3
E, EH
Billing TOU Maximum Demand Register #4
E, EH
1
In 4LN3, 3LN3 and 3BLN3 wiring modes, the voltages will be line-to neutral; for any other wiring mode,
they will be line-to-line voltages.
2
The value is calculated as a relation of the maximum deviation of phase values from a 3-phase average
value to a 3-phase average.
NOTE
Designations of some enginering demands and billing energy and demand registers are shown using a
short name notation available in PAS V1.4. By default, PAS uses long names compatible with older
versions of PAS. You can select a desired notation from the Tools/Options/Preferences tab.
PAS does not allow to store data in files using different data names. If you have a file uploaded with a
previous version of PAS using long data names, either continue using long data names, or store data in a
new file.
See table below for a list of parameters with short and long names.
Predicted sliding window demand
PF (import) at maximum kVA demand
Billing summary (total) register accumulated demand
Billing summary (total) register block demand
Billing summary (total) register sliding demand
Billing summary (total) energy register
Billing summary (total) register maximum demand
Billing tariff energy register
Billing tariff register maximum demand
Generic billing tariff energy register
Generic billing tariff register maximum demand