SATO HR2 Series - Page 61

Section 3: Operation and Configuration
HR2 Series Operator Manual Page 3-21
3.7 INTERFACE MODE (Cont’d)
Setting of RS-232C


FEED button
FEED
button
LINE
button
Select STATUS5
+ FEED button
FEED
button
LINE
button
FEED
button
LINE
button
LINE
button
From DATA PORT
or SUB PORT
screen
FEED
button
LINE
button
FEED
button
LINE
button
FEED
button
LINE
button
FEED
button
LINE
button
Select READY/BUSY or XON/XOFF
+ FEED button
Select STATUS3
or STATUS4 +
FEED button
Displayed only
when STATUS5
is set
Displayed only
when
READY/BUSY
or XON/XOFF
are set
* Press <, > buttons to select item accordingly.
The active arrow icons are displayed on the
screen.
* Press and hold LINE button on each screen
will revert to INTERFACE MODE menu.
Proceed to INTERFACE MODE
menu or EXTERNAL DEVICE
screen.