Schweitzer Engineering Laboratories SEL-787 - Page 244

SET.32
of 68
SEL-787 Settings Sheets
Global Settings (SET G Command)
SEL-787 Relay Instruction Manual Date Code 20081022
Date _______________
Group______________
AOx04
AOx04 ANALOG QTY (Off, 1 analog quantity) AOx04AQ :=
AO
x04 TYPE (I, V) AOx04TYP :=
AO
x04 AQTY LOW (–2147483647 to +2147483647) AOx04AQL :=
AO
x04 AQTY HI (–2147483647 to +2147483647) AOx04AQH :=
If AO
x04TYP = I
AO
x04 LO OUT VAL (–20.480 to +20.480 mA) AOx04L :=
AO
x04 HI OUT VAL (–20.480 to +20.480 mA) AOx04H :=
If AO
x04TYP = V
AO
x04 LO OUT VAL (–10.240 to +10.240 V) AOx04L :=
AO
x04 HI OUT VAL (–10.240 to +10.240 V) AOx04H :=
Input Debounce Settings (Base Unit)
IN101 Debounce (AC, 0–65000 ms) IN101D :=
IN102 Debounce (AC, 0–65000 ms)
IN102D :=
Input Debounce Settings (Slot C)
IN301 Debounce (AC, 0–65000 ms) IN301D :=
IN302 Debounce (AC, 0–65000 ms)
IN302D :=
IN303 Debounce (AC, 0–65000 ms)
IN303D :=
IN304 Debounce (AC, 0–65000 ms)
IN304D :=
IN305 Debounce (AC, 0–65000 ms)
IN305D :=
IN306 Debounce (AC, 0–65000 ms)
IN306D :=
IN307 Debounce (AC, 0–65000 ms)
IN307D :=
IN308 Debounce (AC, 0–65000 ms)
IN308D :=
Input Debounce Settings (Slot D)
IN401 Debounce (AC, 0–65000 ms) IN401D :=
IN402 Debounce (AC, 0–65000 ms)
IN402D :=
IN403 Debounce (AC, 0–65000 ms)
IN403D :=
IN404 Debounce (AC, 0–65000 ms)
IN404D :=
IN405 Debounce (AC, 0–65000 ms)
IN405D :=
IN406 Debounce (AC, 0–65000 ms)
IN406D :=
IN407 Debounce (AC, 0–65000 ms)
IN407D :=
IN408 Debounce (AC, 0–65000 ms)
IN408D :=