Section 01 MAINTENANCE
Subsection 01 (MAINTENANCE CHART)
4-TEC MODELS
FIRST 10 HOURS
EVERY25HOURSOR3MONTHS
EVERY 50 HOURS OR 6 MONTHS
A: ADJUST
C: CLEAN
I: INSPECT
L: LUBRICATE
R: REPLACE
T: PROCEED WITH TASK
EVERY 100 HOURS OR 1 YEAR
PART/TASK LEGEND
ELECTRICAL SYSTEM
Electrical connections and fastening (ignition system, starting system,
fuel injectors etc.)
I I
MPEM and ECM connectors I(1)
MPEM mounting brackets/fasteners I
Digitally Encoded Security System and safety lanyard/post I I
Monitoring beeper I I
Battery and fasteners I I
(1) In salt water use.
STEERING SYSTEM
Steering cable I, A, L I, A, L
O.P.A.S. system including filter (if so equipped) I, A I, A (8) I, A (8) Every 25 hours when riding in weed area.
PROPULSION SYSTEM
Drive shaft corrosion protection L(9)
Drive shaft protection boot I(2)
Drive shaft/impeller splines (normally aspirated and supercharged
engines)
L
Drive shaft/impeller splines (supercharged intercooled engines)
L
Sacrificial anode I
Shifter system/cable I, A, L I, A, L
VTS (Variable Trim System) (if so equipped) I, A I, A
Impeller shaft seal, sleeve and O-ring
I(6)
Impeller and impeller/wear ring clearance I(2)
Water intake grate
I(2)
Ride plate including coolant leak I I
Drive shaft/hull sealing system I I
(2) These items have to be initially checked after
25 hours. Thereafter, servicing to be made as
specified in this chart.
(6) Replace after the vehicle completed 100 hours
of use or 2 years.
(9) Perform at storage period or after 100 hours of
use whichever comes first.
HULL/BODY
Bailer pick-ups, check for obstructions I I
Hull I I
Ski/wakeboard post and fasteners I I
2 smr2005-003
To Next Page
Loading...
Need help?
General
