Sea-doo 2005 4-Tec models User Manual

Section 03 ENGINE SYSTEM
Subsection 04 (EXHAUST SYSTEM)
EXHAUST PIPE
Removal

WARNING
Certain components in the engine compart-
ment may be very hot. Direct contact may
result in skin burn. Let exhaust system cool
down prior to removing parts.
All Models except RXP
Remove seat and seat extension.
Remove seat support.
1
2
F18L2GA
2
1. Seat support
2. Remove screws
RXP Models
Remove seat.
Remove engine cover. Refer to HULL AND BODY.
All Models
Disconnect the 3 cooling hoses from exhaust pipe
no. 1.
2
3
F18D0IA
1
1. Exhaust pipe
2. Gear clamp
3. Exhaust clamp
Loosen the clamps no. 2 to the top portion of the
muffler hose no. 3 between muffler no. 4 and the
exhaust pipe no. 1.
1
F18D0RA
2
1. Muffler hose clamp
2. Exhaust pipe
Detach the strap no. 5 from the muffler using the
spring installer/remover (P/N 529 035 989).
smr2005-009 51
www.SeaDooManuals.net

Sea-doo 2005 4-Tec models Specifications

General

Displacement	1494 cc
Fuel Type	Unleaded gasoline
Engine Type	4-TEC
Cooling System	Closed-loop cooling
Seating Capacity	3
Width	48 inches (122 cm)
Fuel Capacity	15.9 US gallons