Sea-doo 2005 4-Tec models User Manual

Section01MAINTENANCE
Subsection 02 (PRESEASON PREPARATION)
PRESEASON PREPARATION
TO BE PERFORMED BY
PRESEASON PREPARATION
CUSTOMER DEALER
REFER TO
GENERAL
Lubrication and corrosion protection ✔
Storage Procedure
Spark plugs replacement (1)
✔
Ignition System
ENGINE
Exhaust system condition and fasteners ✔
Exhaust System
Condition of seals and fasteners
✔
Appropriate engine SHOP
MANUAL
Oil level
✔
Lubrication System
COOLING SYSTEM
Coolant level
✔
Hoses and components (3) ✔
Cooling System
FUEL SYSTEM
Fuel injection sensors verification ✔ Engine Management
Inspection of check valves, lines, fasteners and
pressurization (2)
✔
Filler neck, fuel tank and fuel cap condition (2) ✔
Fuel tank straps ✔
Fuel Tank and Fuel Pump
Refill fuel tank ✔
Refer to the appropriate
OPERATOR'S GUIDE
ELECTRICAL SYSTEM
Battery condition/charging and installation ✔
Charging System
Connection and routing of electric harness (battery,
starter, etc.) (2)
✔
Electrical System
Digitally Encoded Security System (DESS) and
monitoring beeper verification
✔
Instruments and
Accessories
STEERING SYSTEM
Steering system adjustment and inspection (2)
✔
Steering System
Check O.P.A.S. system condition
✔
Steering System
smr2005-027 3
www.SeaDooManuals.net

Sea-doo 2005 4-Tec models Specifications

General

Displacement	1494 cc
Fuel Type	Unleaded gasoline
Engine Type	4-TEC
Cooling System	Closed-loop cooling
Seating Capacity	3
Width	48 inches (122 cm)
Fuel Capacity	15.9 US gallons