Sea-doo 2005 4-Tec models User Manual

Section 01 MAINTENANCE
Subsection 02 (PRESEASON PREPARATION)
TO BE PERFORMED BY
PRESEASON PREPARATION
CUSTOMER DEALER
REFER TO
PROPULSION SYSTEM
Shifter system condition and cable adjustment
✔
Reverse System
Variable Trim System (VTS) condition
(if so equipped)
✔
VTS System
Propulsion system inspection ✔
Jet Pump and Drive System
HULL and BODY
Inspection of bailer pick-ups ✔ Hull/Body
Ski/wakeboard post and fasteners
(if so equipped)
✔ Hull/Body
(1)
Before installing new spark plugs, it is suggested to burn the excess BOMBARDIER LUBE (P/N 293 600 016)
or equivalent by starting the engine using the old spark plugs.
(2)
Safety item covered in the annual safety inspection.
(3) If antifreeze was not changed for storage, drain and replace with new antifreeze.
N.A.: Not applicable
4 smr2005-027
www.SeaDooManuals.net

Sea-doo 2005 4-Tec models Specifications

General

Displacement	1494 cc
Fuel Type	Unleaded gasoline
Engine Type	4-TEC
Cooling System	Closed-loop cooling
Seating Capacity	3
Width	48 inches (122 cm)
Fuel Capacity	15.9 US gallons