Sea-doo 2005 4-Tec models User Manual

Section 09 HULL/BODY
Subsection 01 (ADJUSTMENT AND REPAIR)
1
F18L37A
1. Screws to be removed
1
F18L38A
1. U-clamp
Remove finition U-clamp, and screws then pull out
wake post.
Disassembly
Loosen the stopper screw.
1
F18L39A
1. Stopper screw
Pull the safety lock pin to unlock and pull out the
cylinder.
1
F18L3AA
1. Safety lock pin
Assembly
Before assembly verify the physical condition of
cylinder groove and adjustment holes.
smr2005-024 277
www.SeaDooManuals.net

Sea-doo 2005 4-Tec models Specifications

General

Displacement	1494 cc
Fuel Type	Unleaded gasoline
Engine Type	4-TEC
Cooling System	Closed-loop cooling
Seating Capacity	3
Width	48 inches (122 cm)
Fuel Capacity	15.9 US gallons