CDHD Diagnostics and Troubleshooting
User Manual 241
8 Profile Position Mode
8 Lit steadily
D e finit ion Profile Position Mode
8 = drive disabled; 8. = drive enabled
Type Mode
Act ive disa ble Not applicable
M e ssage # Not applicable
Descr iption Not applicable
Action required Not applicable
8 . H a rdw are Em ber Sw it ch Activat e d
8. All segments of the LED display light up mom entarily
D e finit ion Hardware Em ber Switch Activated
Type Not applicable
Act ive disa ble Not applicable
M e ssage # Not applicable
Descr iption
All segm ents of the LED display light up when the
Hardware Ember switch is activated. Pressing the switch
sets the drive to serial communication Boot-Up Mode.
Action required Not applicable
A4 CAN Supply Fa ult
A4 Displayed in sequence
D e finit ion CAN Supply Fault
Type Fault
Act ive disa ble Yes
M e ssage # FLT 32
Descr iption
A problem with the internal voltage supply for the CAN
bus.
This fault disables the drive.
Action required
The drive probably needs repair. Cont act Technical
Support.
To Next Page
