SICK FLOWSIC100

Start-up and Parameter Settings
FLOWSIC100 · Operating Instructions · 8012513/YSA5/V 2-1/2016-07 · © SICK Engineering GmbH 123
Subject to change without notice
Device selection
 Move the required devices with drag-and-drop or a double-click on the required device
into the project area.
– The configuration of the devices is shown in a separate device window.
–
The device windows can be opened by a double-click on the respective
device file or the context menu (  p. 124, Fig. 98).
Fig. 97 Device selection