SICK microScan3 Core I/O AIDA User Manual

Menu
T
he menu provides access to the following areas:
•
Device info
•
Diagnostics
•
Device restart
•
Settings
Approach
b Pr
ess the OK pushbutton 4 twice in succession to call up the menu.
b Use the arrow buttons 1, 2 to change to the desired menu item.
b Confirm the desired menu item using the OK pushbutton 4.
b
Use the same pushbuttons to navigate through the submenus.
b Press the Back pushbutton 3 to return to the higher-level menu item.
b Press the Back pushbutton 3 multiple times to return to the status display.
b
Do not press any pushbutton for some time so that the display returns to the
status display.
Device info
Y
ou will find information about the following subjects in the area:
•
Hardware: For example type code, part numbers, serial numbers, firmware versions,
functional scope of device
•
Configuration: For example device name, application name, checksum, date of last
configuration, functional scope of configuration
•
Service interfaces: Information on whether access to individual interfaces and serv‐
ices is activated or deactivated
The Functionality of the device and Functionality of the configuration show whether a configu‐
ration is compatible with the firmware version of a device. This can be important when
exchanging a device, for example.
Configuration and firmware version of a device are compatible if the following condi‐
tions are met:
•
The 1st place of both numbers must be identical
•
The 2nd place for the device must be at least as large as that for the configuration
•
The 3rd place does not have an effect on the compatibility
Diagnostics
Chec
k whether the safety laser scanner is being dazzled by an external light source in
the scan plane, e.g., sun, halogen light, infrared light source.
•
Intrusions: Position and time of the last 10 objects in a protective field that have led
to a safety output switching to the OFF state.
•
Messages: Error code and error type of the last 10 error messages.
•
Service: Currently measured contamination of the optics cover, operating hours,
number of power-up processes.
Device restart
Y
ou have the following options in the Device restart area:
•
Restart the safety laser scanner.
Settings
Y
ou have the following options in the Settings area:
•
Set the display brightness and contrast.
TROUBLESHOOTING 11
8017784/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O AIDA
117
Subject to change without notice

SICK microScan3 Core I/O AIDA Specifications

General

Brand	SICK
Model	microScan3 Core I/O AIDA
Category	Scanner
Language	English