SICK microScan3 Core I/O AIDA

Test rod The test rod is an opaque, cylinder-shaped object used to check
t
he detection capability of the active opto-electronic protective
device. The diameter of the test rod is the same as the resolution
of the active opto-electronic protective device.
Universal I/O Universal I/O can be configured as universal input or as universal
out
put.
Universal input Depending on the device, a universal input can be used for reset‐
ting, external device monitoring (EDM), sleep mode, or restarting
the protective device, for example. If sleep mode is activated by
a universal input, the sleep mode must not be used for safety
applications. Certain universal inputs can also be used in pairs as
a static control input.
GLOSSARY 17
8017784/1ELL/2022-01-21 | SICK O P E R A T I N G I N S T R U C T I O N S | microScan3 Core I/O AIDA
141
Subject to change without notice