User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
6.8.3 Checking the tightening of the wheel bolts
Use a torque wrench to check that the wheel bolts are tightened correctly; if
necessary, tighten them in accordance with the tightening torques of the bolts.
The torque wrench must be approved and in good condition; do not use your
hands to tighten bolts.
6.8.4 Tyre pressure check
To properly check the tire inflation pressure, bring the vibrating head to the
resting position and stop the machine safely.
Check tire inflation pressure and, if necessary, inflate the tires according to
the instructions.
Tires Inflate pressure
BKT 14 PLY RATING 11.5/80-15.3
2.5 bar
DANGER
Do not continue driving with one or more deflated tires as the correct handling
of the machine may be impaired.
6.8.5 Tires replacement
If the machine’s tires are excessively worn, they must be replaced immediately.
For the correct replacement of tires, consult a specialist.
124
To Next Page
Loading...