Sicma TR80 - Warnings on Machine Cleaning, Adjustment and Maintenance

User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
2.1.5 Warnings on machine cleaning, adjustment and
maintenance
CAUTION
Failure to comply with these warnings may cause serious damage to people,
animals or property. The Manufacturer declines any responsibility for the non
observance of such requirements.
-
Do not stand near the machine for any reason before having engaged
the tractor parking brake, turned off the engine and removed the
ignition keys from the control dashboard.
-
Should it be necessary to clean, adjust, service, repair the machine
or parts thereof, observe the requirements set out in the chapter
concerning maintenance (*).
-
Only intervene after having firmly rested the vibrating head on the
ground (unless otherwise specified in this manual). Make sure that the
parts near the area of intervention do not retain mobility or mechanical
stresses such to be source of danger. Pay the utmost attention to any
protruding or pointed parts.
-
Never work under the machine or under machine parts off the ground.
When work needs require access under the machine or machine parts
off the ground, previously secure them with support systems (such as
props, trestles, ...) adequate in terms of load capacity and number.
Operate the positioning taking every precaution to ensure that no part
is freely moving.
-
Intervene only when equipped with proper equipment and appropriate
personal protective equipment compliant with the regulations of the
country of use.
-
Preventive, constant and careful maintenance always guarantees a
greater degree of safety. Never postpone necessary repairs, have them
performed only by authorized personnel and use only original spare
parts.
(*) See par. “6” pag. 101
20