Machine use
WARNING
Keep the cardan shaft in horizontal position; pay particular attention not to
subject the cardan to excessive inclination angles.
5.1.4 Electrical connection
The machine is supplied with a 12V three-pole electrical plug (1) which must
be connected to the tractor (see example in Figure 44).
If the tractor is not equipped with three-pole hitches, adapt its system with
the necessary modifications. Contact a specialized technician for this type of
operation.
DANGER
It is forbidden to connect wet plugs or sockets.
1
Figure 44
77
SICMA S.r.l.
To Next Page
Loading...