Machine use
5.6 Machine operating cycle
The operator driving the tractor is responsible for the general progress of the
work and, therefore, he must adequately prepare the machine on the ground,
configure it, operate it and supervise it.
DANGER
Before using the machine, inspect the work area for any hazardous
conditions. Check that there are no holes, loose embankments or debris that
could compromise the control of the machine.
ATTENTION
The processing, regardless of the position of the telescopic arm and the
inclination of the ground, must be carried out with the vibrating head
positioned horizontally, as illustrated in Figure 53.
Figure 53
93
SICMA S.r.l.
To Next Page
Loading...