EasyManua.ls Logo

Sicma TR80 - Improper Use

Default Icon
162 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
2.5 Improper use
- NEVER carry out dangerous maneuvers that could cause the machine
and consequently the tractor to become unstable.
- NEVER carry out operational handling of the machine with the
telescopic arm extended or with the vibrating head not aligned with
the telescopic arm. The vibrating head must therefore represent the
longitudinal extension in the space of the arm itself. Failure to follow
these precautions can create a risk of instability.
- NEVER work in conditions of excessive gradient.
- NEVER tackle slopes with the arm raised.
- NEVER act on the controls of the moving machine.
- NEVER drive the machine connected to the tractor on a public road.
DANGER
Use of the machine for unauthorized purposes, its improper use and lack
of maintenance can lead to the risk of serious danger to health and safety
of operator, as well as affecting the working efficiency and safety of the
machine.
WARNING
The manufacturer accepts no liability in the event of improper or unauthorized
use of the machine.
The actions described below list some reasonably foreseeable possibilities for
unauthorized use of the machine:
- NEVER operate the machine without proper training in its operation.
- NEVER use the machine in explosive evironments.
- NEVER operate the machine without the necessary safety devices.
-
NEVER remove, tamper with or intervene on the protection and safety
devices either mechanically or electrically.
-
NEVER use the machine in the presence of flammable or combustible
substances.
-
NEVER allow the machine to be used by unauthorized persons or by
minors under the age of 18.
-
NEVER operate the machine in unforeseen environmental conditions
or during storms.
-
NEVER operate the machine on rough terrain or near unstable ditch
edges.
-
NEVER move the machine at inappropriate speeds, especially on bends.
- NEVER operate beyond the slope limits allowed for the machine.
- NEVER operate in low light conditions.
24

Table of Contents

Related product manuals