User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
7. Troubleshooting
7.1 General warnings
7.2 Troubleshooting
PROBLEMS CAUSES SOLUTIONS STAFF
The machine does not
perform the movements
requested by radio control
The tractor engine is
switched off
Turn on the tractor engine Operator
The tractor PTO is not en-
gaged
Engage the PTO Operator
The number of revolutions
of the tractor is low, it is not
correct for the use of the
machine
Use the tractor at a correct
number of revolutions
Operator
The oil flow from the tank is
blocked or insufficient
Replace the oil filter in the
tank and restore the level
Competent
technical staff
The remote control does not
turn on
No power supply
Restore power by plugging it
in correctly
Operator
Remote control batteries flat
Replace/recharge the re-
mote control battery
Operator
The remote control is not
connected to the control unit
Press the green button twice
in sequence
Operator
Check the control unit fuse
(red light)
Replace the fuse Operator
To carry out repair, maintenance or adjustment operations not described in the
previous paragraphs, we recommend that you contact specialized personnel,
or in any case, follow the instructions in this User and Maintenance Manual.
The table in the next paragraph shows the personnel who must perform the
indicated operation. Strict adherence is recommended.
General operator
-
Researches malfunctions and, if qualified, he removes the anomalies
causes, restoring the machine proper functioning condition.
Electrical/Mechanical maintenance technician
-
Intervenes in case the general operator did not manage to identify the
trouble causes or in case the general operator is non entitled to restore
the machine proper functioning condition.
144
To Next Page
Loading...