Maintenance
6.9 Electrical system
6.9.1 Emergency stop button efficiency check
With the machine in the operating configuration, carry out an emergency stop
button efficiency check while performing a movement.
Pressing the button must stop any movement of the machine.
DANGER
Replace the emergency stop button immediately if it is not functioning
properly; malfunction would compromise operator safety.
6.9.2 Electric cables position check
Check that there is no friction between the electrical cables and the frame or
other mechanical parts of the machine.
If damaged electrical cables are found, replace them; this procedure must be
performed by a qualified technician.
125
SICMA S.r.l.
To Next Page
Loading...