Machine transport and handling
4.3 Adjustments
Adjustments on the machine, such as those on pumps and hydraulic motors,
or the eventual calibration of the vibration of the head, may only be carried
out by specialized personnel authorized by the manufacturer.
ATTENTION
Any tampering not authorized by the Manufacturer will be the responsibility
of the customer.
4.4 Handling
The machine can only be handled when coupled to a tractor with certain
characteristics (see “5.1 Coupling to the tractor” pag. 72) and only to
circulate in the work area (operational travel).
The machine must be correctly configured to run for long distances; refer to
“3.5.2 Size in transport configuration” pag. 46.
During operational movements, the mechanical equipment must be semi-
mounted by the tractor with the header in the collect position, specifically
designed for transport.
DANGER
It is absolutely forbidden to operate the telescopic arm extension or the
header vibration while the machine is moving.
DANGER
All machine handling operations must be performed with the machine raised
and without personnel onboard the machine.
When moving the machine, the operator maneuvering the tractor must
always adjust the speed of the tractor according to the terrain, visibility and
atmospheric conditions.
DANGER
It is absolutely forbidden to exceed the travel speed of 30 km/h.
71
SICMA S.r.l.
To Next Page
Loading...