User and maintenance manual - SEMI-MOUNTED HARVESTER WITH TRUNK SHAKER - TR80
Rev. 0 - 05/2021
• Raise the platform until it is aligned with the floor of the transport
vehicle.
• Disengage the tractor parking brake to reverse at low speed.
• Proceed slowly and carefully until you have approached the tractor to
the machine.
• Connect the machine to the tractor to unload it (*).
• Make sure the PTO (540 rpm) is engaged and active.
(*) See par. “5.1” pag. 72
Figure 38
68
To Next Page
Loading...