Machine use
• Insert the pins (3) in the lower attachment points (2) and lock them
with the safety pins (4).
• Bring the tractor tie rod/cylinder up to the third upper point (1) of the
machine until the holes match, then insert the pin and lock it with the
appropriate safety split pin.
• Adjust the oscillation of the lateral arms of the three-point connection
of the machine using the related tie-rods.
• Adjust the balance of the machine by means of the third point and
adjustable vertical tie-rod of the tractor’s three-point connection.
2
3 4
1
ATTENTION
Once the coupling operation has been completed, always check that all the
connections have been made correctly and make sure that all the pins have
the safety pin inserted and closed.
Figure 42
75
SICMA S.r.l.
To Next Page
Loading...