Accessories
Optional Accessories
18 / 54 AXD3-340.620.13.01.02 Operator Manual
◆ Press both tension levers (2) outward.
◆ Check that the tensioning roller is firmly seated by pulling on it.
◆ Press the ratchet handle (1) downward.
❏ The belt is released.
◆ Lift the holder with the belt across the patient.
◆ Push the holder over the back accessory rail. Make sure that the compression
belt attaches straight across the tabletop and not at an angle.
22
3
1
For very obese patients, the belt holder is easier to secure if you are standing at
the back of the patient table. In this case, and for very restless or frail patients,
we recommend that someone assist you in attaching the compression belt.
To Next Page
Loading...
