Siemens FS20 - Installation Checklist

Mounting and installation of the compact control panels
Installation checklist
5
260 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.38 Installation checklist
The following list serves as a checklist or task list for the installation personnel. It
includes all components available as options. It can be copied and handed out to
the installation personnel with the installation instructions.
Position Type Component/task Comment Complete
1 – Install rear panel –
2 – Install housing extensions
Additional empty housing for further
components (e.g. batteries)
3 – Connect the mains cable
Note country-specific terminal
allocation
4 – Install operating unit Standard
5 – Install operating add-on
In bottom half of housing or in
additional housing
6 – Mounting the cover cap –
7 – Install periphery board Only after a disassembly
8 – Install fire terminal board Only after a disassembly
9 FP2003-A1
Install a power supply
(70 W)
Option for fire terminal
10 FP2004-A1
Install a power supply
(150 W)
Option of extra power supply for
Comfort and Large Extension
housings
11 FCA2010-F1
Install a 9 V battery set
[FR]
Only for France
12 –
Install shield connection
terminal blocks
Included in country kit [DE] FA2001
13 FCI2003-A1
Integrate a loop extension
(FDnet)
Max. 2 modules depending on the
periphery board
14 Z3B171 Install relay module –
15 FHA2007-A1 Install mounting plate Mounting above the periphery board
16 FCI2001-D1
Install fire brigade
periphery module [DE]
Only for Germany.
Note different mounting possibilities
17 FN2001-A1
Install network module
(SAFEDLINK)
Max. 2 modules
Ensure correct installation site
18 FCA2006-A1
Connection module (card
cage)
Only if replaced
19 FCA2007-A1
FCA2008-A1
Card cage (2 slots)
Card cage (5 slots)
Only if replaced
20 FCI2008-A1
FCL2001-A1
FCL2002-A1
FCL2003-A1
Module bus cards:
I/O card (programmable)
Line card (FDnet/C-NET)
Line card (collective)
Line card (MS9i)
Mounting in card cage:
Only possible in FC2060
Only possible in FC2060
21 FCA2001-A1 Install RS232 module
Ensure correct installation site
(depending on use)
22 FCA2002-A1 Install RS485 module –