Siemens FS20 - Insert License Key

Mounting and installation FC2080
Insert license key
6
308 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
6.12 Insert license key
The license key is inserted in the communication card (FC2080/FG2020) in the
holder intended for it.
Prerequisites
Note the wiring of the Ethernet cable before you remove the card for the installation
of the license key.
Figure 170: Inserting the license key into the communication card.
1 Holder for the license key
2 License keys
1. Raise clamp of retainer (1) slightly and push the license key (2) underneath the
clamp with the engraving pointing downwards (broader, flat side to the top).
2. Re-insert the communication card and re-insert the Ethernet cable correctly.
3. Restart the system.
1
2