Siemens FS20 - Cover Cap

Setup of the compact control panels
Operating unit, operating add
-
on and cover cap (packaging unit)
3
40 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
Supplied mounting material
4x M5 screws for securing the operating unit
2x M2.5 screws for securing the hinge of the operating unit
1x
ribbon cable for the connection from the PMI & mainboard to the periphery
board
Inscription set or inscription sheet (only for operating unit)
You will find additional inscription strips, e.g. for the operating add
-
on, in
document 009026.
3.4.2 Cover cap
Figure 12: Rear view of cover cap
1 Distance pins
2 Fixing screw
1
2
1