Siemens FS20 - Fitting an Additional Power Supply (150 W)

Mounting and installation of the compact control panels
Power supply (150 W)
5
101 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.7.2 Fitting an additional power supply (150 W)
The additional power supply (150 W) FP2005-A1 in the Comfort housing is
installed vertically along with the existing power supply to save space.
Preparatory work
Before the additional power supply FP2005-A1 can be installed, the existing power
supply and the DIN rail must be removed as described in the previous chapter.
Installing a power supply
Figure 44: Installation of an additional power supply (150 W) in the Comfort housing
1 Lugs at the top for screw fastening
2 Additional power supply (150 W)
3 Existing power supply (150 W)
4 Distance pins at the bottom
X1 Mains connection terminal
X8 Supply output terminal
X11 Monitoring signal terminal
X8
X11
2
3
4
1
X1