Siemens FS20 - Loop Extension; Installation

Mounting and installation of the compact control panels
Loop extension
5
116 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.10 Loop extension
5.10.1 Installation
The loop extensions (FDnet) FCI2003-A1 are mounted onto the periphery board.
The slots are located next to the corresponding detector line connections.
The installation of the two loop extensions on the periphery board (4-loop) is
identical.
● Loop extension integrated line card 1:
– Plug X15 / periphery board (4-loop)
– Plug X15 / periphery board (2 loops)
● Loop extension integrated line card 2:
– Plug X25 / periphery board (4-loop)
Figure 54: Installing a loop extension with the example of the periphery board (2-loop)
X13
X14
1
2
3
4
5
X14