Siemens FS20 - Periphery Board (4 Loops); Installation

Mounting and installa
tion of the compact control panels
Periphery board (4 loops)
5
81 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.4 Periphery board (4 loops)
5.4.1 Installation
The periphery board (4-loop) FCI2004-A1 is already mounted in the fire control
panels in the factory and only has to be replaced in the event of a repair.
Figure 37: Mounting of the periphery board (4 loops)
1 Threaded bolts on rear panel
2 13 fixing screws
3 Periphery board (4 loops)
X1 Connector for supply
X3 Connector for connection cable to PMI & mainboard (operating unit)
X400 Connector for the periphery bus to the fire brigade periphery module [DE]
X401 Connector for periphery bus
X11
X12
X5
X6
X7
X22
X21
X8
1
2
3
X1
X3
X400
X401