Siemens FS20 - 19 Mounting Kit

Mounting and installation of the compact control panels
19" mounting kit
5
218 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.31 19" mounting kit
The 19" mounting kit FHA2016-A1 serves as a retainer for installing a station into a
19" rack or into a 19" cabinet. To fix a station, the two retainers enclosed with the
kit must be mounted.
The mounting instructions described below apply to all housing types.
Figure 118: Installing the 19" mounting kit, taking the example of the Standard housing
1 Fixing screws for the station (3x or 5x), M5 x 10 pan head screws
2 Rear panel of the station
3
Fixing of the crossbars on the 19" housing or rack (2 screws each) with M5 x
10 pan head screws
4 19" housing or rack
5 19" cross bars (4x per kit)
6 19" housing brackets (2x per kit)
7
Hexagonal fixing screws M6 x 12 for housing brackets (2x per side) and
washers M6
8 Top 19" retainer
9 Bottom 19" retainer
1
2
5
3
6
9
8
4