Siemens FS20 - Switching the Network Module with Dual CPU Operation

Mounting and installation FC2080
Installing the CPU card and communication card
6
306 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
6.11.2 Switching the network module with dual CPU operation
If a second CPU card is installed for redundant CPU operation, the network module
must be removed from the communication card and plugged into the second CPU
card, before it is installed, as shown.
Figure 167: Switching the network module from the communication card to the CPU card
1 Remove the network module from the communication card
2 Communication card
3 Plug the network module into the second CPU card
4 Second CPU card (optional)
2
3
4
1