Siemens FS20 - Event Printer; Installation

Mounting and
installation of the compact control panels
Event printer
5
189 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.21 Event printer
5.21.1 Installation
This component is installed in exactly the same way as for the operating units
with the PMI & mainboard FCM2004 and the PMI & mainboard FCM2027.
The event printer FTO2001-A1 is an option and can be installed either in the
operating unit or in the operating add-on, depending on the station design.
Depending on the operating add-on, the printer can be installed either on the left or
on the right.
Figure 101: Installation of the printer in the operating unit
1 Event printer
2 Mounting space for the event printer
3 Guide for the fastening clamp
4 Fastening clamp (for both sides)
Prerequisite
Note that the serial RS232 module FCA2001-A1 is not included in the printer set
and has to be mounted unless it is already installed. Only one printer can be
connected per RS232 module.
2
1
4
3