Siemens FS20 - About this document

About this document
Applicable documents
1
9 |
354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
1 About this document
Goal and purpose
This document describes the installation process for the stations and components
of the FS20fire detection system. It especially provides information on the
following:
● Mounting of the stations
● Mounting of the individual components
● Assembly of the stations
The document 008836 System description contains the overview of the structure
and function of the fire detection system and of the structure of the documentation.
Document 008837 Product data contains the detailed technical description for the
components of the FS20 fire detection system.
You will find information about assembling and installing the gateway (SIGMANET)
and the associated components in the Gateway (SIGMANET) Technical Manual
A6V10281424.
Scope
The information contained in this document is valid for market package MP6.
The document also contains information on country-specific components. Country-
specific components are marked with square brackets, e.g. [DE]. It may be the
case that these cannot be used in your country.
Target groups
The information in this document is intended for the following target groups:
Target group Activity Qualification
Installation personnel
● Assembles and installs the product
components at the place of
installation.
● Carries out a function check
following installation.
● Has received specialist training in
the area of building installation
technology or electrical installations.
Commissioning personnel
● Configure the product at the place
of installation according to
customer-specific requirements.
● Check the product operability and
release the product for use by the
operator.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist
training for the function and for the
products.
● Has attended the training courses
for commissioning personnel.
Maintenance personnel ● Carries out all maintenance work.
● Checks that the products are in
perfect working order.
● Searches for and corrects
malfunctions.
● Has obtained suitable specialist
training for the function and for the
products.