Siemens FS20 - Periphery Board (2-loop)

Mounting and installation of the compact control panels
Periphery board (2
-
loop)
5
74 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
5.3 Periphery board (2-loop)
5.3.1 Installation
The periphery board (2-loop) FCI2002-A1 is mounted in the fire control panels in
the factory and only has to be replaced in the event of a repair.
Figure 36: Mounting of periphery board (2-loop)
1 Threaded bolts on rear panel
2 9 fixing screws
3 Periphery board (2-loop)
X1 Connector for supply
X3 Connector for connection cable to PMI & mainboard (operating unit)
X400 Connector for periphery bus
X9
X8
X7
X6
X12
X11
2
3
1
X400
X3
X1