Siemens FS20 - Installing the Card Cage (5 Slots) on the Carrier (19, Card Cage)

Mounting and installation FC2080
Assembling the carrier (19", card cage)
6
272 | 354
Building Technologies
008851_s_en_
--
Fire Safety
2016
-
01
-
27
6.3.1 Installing the card cage (5 slots) on the carrier (19", card
cage)
The carrier (19", card cage) FHA2023-A1 is supplied without a card cage (5 slots)
FCA2008-A1. A maximum of two card cages (5 slots) can be installed.
Figure 145: Installing the card cage (5 slots) on the carrier (19", card cage)
1 Top cable duct (shown removed)
2 Card cage (5 slots)
3 6 fixing screws M3 x 6
4 Mounting holes in the card cage
5 Threaded press-in sleeves for securing the card cage on the right-hand side
6 Threaded press-in sleeves for securing the card cage on the left-hand side
7 Lateral cable duct (shown removed)
1. Install the card cage (5 slots) (2) with six fixing screws (3) on the pressed-in
threaded sleeves (5) in the carrier (19", card cage).
2. The installation process for the second card cage (5 slots) is identical to that of
the first card cage.
1
2
3
7
6
5
4