4
52 | 354
4 Setup of FC2080
4.1 Packaging units
The fire control panel FC2080 is delivered in several packaging units. Mounting
and assembly are carried out on-site.
Housing (19", pedestal cabinet) incl. accessories
● Housing incl. door with plan compartment, standing on ½ Euro pallet, wrapped
with plastic film
● Base for housing incl. mounting matieral
● 2 C rails with 10 screws M4 x 6
● 2 cable ducts 80 x 80 x 80 x 1500 mm
● 12 Philips screws M6 x 10
● 2 toothed discs M6
● 10 shield connection terminal blocks
● 1 switch
● 1 power socket (Euro)
● 4 expansion bolts with screws for wall mounting
● 1 Siemens/Sinteso sticker each
● 4 screws to fix the cabinet on the base
Components
Each component is a packaging unit.
● Battery tray (FC2080)
● Basic components
– Processor unit (19", FC2080) incl. plug-in cards and installation plate
– Carrier (19", power supply) incl. mounting accessories
● Additional components and devices incl. accessories in line with order
● Batteries
● Operating unit and operating add-ons, optional
● Options for the operating unit
To Next Page
Loading...
